Magnimage Mach Series LED Display Controller FW16-C All-in-1 LED Video Processor

The FW16-C-D/H(MH80-D/H) is an all-in-one video controller developed by Magnimage for the rental market. With a complete video image input interface, which FW16-C-D including 1 × HDMI2.0, 1 × DP1.2, 4 × DVI, 1 × 12GSDI, FW16-C-H including 2 × HDMI2.0, 2 × DP1.2, 2 × DVI, 1 × 12GSDI; Output support for 16-way Gigabit Ethernet port, 4-way 10G fiber input / output, 1 × HDMI2.0 loop-out, 1 × HDMI monitoring; the widest horizontal resolution up to 16 HDMI2.0 ring out, 1 × HDMI monitoring; the widest horizontal resolution of a single machine up to 16380, the highest vertical up to 7680.
The FW16-C-D/H(MH80-D/H) has three working modes, which are categorized into Mach mode, conventional mode and photoelectric conversion mode. Under Mach mode, the single network port carries 2.2 million pixels, and the whole machine has 8 main network ports and 8 standby ports, and the whole machine carries a maximum of 17.6 million pixels; under conventional mode, the single network port carries 980,000 pixels, and the whole machine has 16 network port outputs, and the whole machine carries a maximum of 15.68 million pixels; the photoelectric conversion mode is used for the equipment to do optical port backup.
The FW16-C-D/H(MH80-D/H) supports quick screen pointing function, no need for computer software to configure screen connection, which greatly simplifies the on-site debugging steps.

Supports quick screen pointing, no need for computer software to configure screen connection.
Support single network port backup and multi-machine network port backup.
Four-layer display, full-screen roaming at will
Support single-machine multi-channel input splicing and multi-machine splicing.
Support single-port 4K * 2K / 60Hz (HDMI2.0) or 8K * 1K (DP1.2) input
Support 16-channel Gigabit Ethernet port output
Support HDR 10/HLG
Support template saving and retrieval
Support receiver card serial number calibration
Support single input backup
Support multi-computer group backup, can be a full set of the main system at the same time switch to the backup system
Support optical port input/output and optical port backup.
Supports seamless switching of input signals and presets.
4K@60Hz RGB 4:4:4 processing
Support layer fast templates
Support local USB flash disk to read and load configuration files
Debugging network port comes with a ring out, no need to set up a router LAN, convenient for multi-computer cascade debugging
Support free alignment function (in regular mode)
Support zoom and image capture function
Support monitor output function
Support advanced connecting screen
Support connecting Magnimage C-Link series receiver card

FW16-C All-in-1 Video Processor

• 2.2 Million Pixels Per 1G Cable
  

Mach series control system improves the transmission of one network cable by 650,000 points to 2.2 million points ,breaking through the bottleneck of the traditional LED control system transmission.
It simplifies the connection of LED screen and facilitates on-site wiring, saving time, effort and money.

• The whole machine is 8 main and 8 standby, The whole machine loading up to 17.6M
  

Single controller integrates main and backup network cable output into an all-in-one machine, which improves the reliability of on-site activities and greatly saves the cost of equipment and long lan cables.

• 10G optical ports inputs/outputs
  
• 4 Layers Seamless Switching
  
• Supports multi-machine splicing
  

Support multi-machine cascade splicing, easily control large resolution LED screen.

• Support interconnection with OPT port of V16 / V12
  

Support optical fiber interconnection with V16, V12, EC90 and other equipment, making signal transmission more stable and farther, and more cost-effective. 

 
Further Information:
FW16-C
Magnimage FW16-C LED Video Controller Specification
Magnimage FW16-C LED Video Controller User Manual
C-Link_5.1.0.4_2024-07-01 Installation Program (Receiver Card Version 3.0 and above)
C-Link_4.3.0.8_2023-11-10 installer (Receiver card version 3.0 or below)